Naive Bayes Classifier
Warning: The content displayed has been partially or fully included from Wikipedia::Naive_bayes_classifier. Please refer to the source wiki's license and our policy on Interwiki Importing for more information. |
Machine learning and data mining |
---|
Problems |
Clustering |
Dimensionality reduction |
Structured prediction |
Anomaly detection |
ANN |
Theory |
A naive Bayes classifier is a simple probabilistic classifier based on applying Bayes' theorem with strong (naive) independence assumptions. A more descriptive term for the underlying probability model would be "independent feature model". An overview of statistical classifiers is given in the article on pattern recognition.
Contents
Introduction
In simple terms, a naive Bayes classifier assumes that the value of a particular feature is unrelated to the presence or absence of any other feature, given the class variable. For example, a fruit may be considered to be an apple if it is red, round, and about 3" in diameter. A naive Bayes classifier considers each of these features to contribute independently to the probability that this fruit is an apple, regardless of the presence or absence of the other features.
For some types of probability models, naive Bayes classifiers can be trained very efficiently in a supervised learning setting. In many practical applications, parameter estimation for naive Bayes models uses the method of maximum likelihood; in other words, one can work with the naive Bayes model without accepting Bayesian probability or using any Bayesian methods.
Despite their naive design and apparently oversimplified assumptions, naive Bayes classifiers have worked quite well in many complex real-world situations. In 2004, an analysis of the Bayesian classification problem showed that there are sound theoretical reasons for the apparently implausible efficacy of naive Bayes classifiers.^{[1]} Still, a comprehensive comparison with other classification algorithms in 2006 showed that Bayes classification is outperformed by other approaches, such as boosted trees or random forests.^{[2]}
An advantage of naive Bayes is that it only requires a small amount of training data to estimate the parameters (means and variances of the variables) necessary for classification. Because independent variables are assumed, only the variances of the variables for each class need to be determined and not the entire covariance matrix.
Probabilistic model
Abstractly, the probability model for a classifier is a conditional model
over a dependent class variable with a small number of outcomes or classes, conditional on several feature variables through . The problem is that if the number of features is large or when a feature can take on a large number of values, then basing such a model on probability tables is infeasible. We therefore reformulate the model to make it more tractable.
Using Bayes' theorem, this can be written
In plain English, using Bayesian Probability terminology, the above equation can be written as
In practice, there is interest only in the numerator of that fraction, because the denominator does not depend on and the values of the features are given, so that the denominator is effectively constant. The numerator is equivalent to the joint probability model
which can be rewritten as follows, using the chain rule for repeated applications of the definition of conditional probability:
Now the "naive" conditional independence assumptions come into play: assume that each feature is conditionally independent of every other feature for given the category . This means that
- ,
,,
and so on, for . Thus, the joint model can be expressed as
This means that under the above independence assumptions, the conditional distribution over the class variable is:
where the evidence is a scaling factor dependent only on , that is, a constant if the values of the feature variables are known.
Constructing a classifier from the probability model
The discussion so far has derived the independent feature model, that is, the naive Bayes probability model. The naive Bayes classifier combines this model with a decision rule. One common rule is to pick the hypothesis that is most probable; this is known as the maximum a posteriori or MAP decision rule. The corresponding classifier, a Bayes classifier, is the function defined as follows:
Parameter estimation and event models
All model parameters (i.e., class priors and feature probability distributions) can be approximated with relative frequencies from the training set. These are maximum likelihood estimates of the probabilities. A class' prior may be calculated by assuming equiprobable classes (i.e., priors = 1 / (number of classes)), or by calculating an estimate for the class probability from the training set (i.e., (prior for a given class) = (number of samples in the class) / (total number of samples)). To estimate the parameters for a feature's distribution, one must assume a distribution or generate nonparametric models for the features from the training set.^{[3]}
The assumptions on distributions of features are called the event model of the Naive Bayes classifier. For discrete features like the ones encountered in document classification (include spam filtering), multinomial and Bernoulli distributions are popular. These assumptions lead to two distinct models, which are often confused.^{[4]}^{[5]}
Gaussian naive Bayes
When dealing with continuous data, a typical assumption is that the continuous values associated with each class are distributed according to a Gaussian distribution. For example, suppose the training data contain a continuous attribute, . We first segment the data by the class, and then compute the mean and variance of in each class. Let be the mean of the values in associated with class c, and let be the variance of the values in associated with class c. Then, the probability density of some value given a class, , can be computed by plugging into the equation for a Normal distribution parameterized by and . That is,
Another common technique for handling continuous values is to use binning to discretize the feature values, to obtain a new set of Bernoulli-distributed features. In general, the distribution method is a better choice if there is a small amount of training data, or if the precise distribution of the data is known. The discretization method tends to do better if there is a large amount of training data because it will learn to fit the distribution of the data. Since naive Bayes is typically used when a large amount of data is available (as more computationally expensive models can generally achieve better accuracy), the discretization method is generally preferred over the distribution method.
Multinomial naive Bayes
With a multinomial event model, samples (feature vectors) represent the frequencies with which certain events have been generated by a multinomial where is the probability that event i occurs (or k such multinomials in the multiclass case). This is the event model typically used for document classification; the feature values are then term frequencies, generated by a multinomial that produces some number of words (see bag of words assumption). The likelihood of observing a feature vector (histogram) F is given by
The multinomial naive Bayes classifier becomes a linear classifier when expressed in log-space:^{[6]}
where and .
If a given class and feature value never occur together in the training data, then the frequency-based probability estimate will be zero. This is problematic because it will wipe out all information in the other probabilities when they are multiplied. Therefore, it is often desirable to incorporate a small-sample correction, called pseudocount, in all probability estimates such that no probability is ever set to be exactly zero. This way of regularizing naive Bayes is called Laplace smoothing when the pseudocount is one, and Lidstone smoothing in the general case.
Rennie et al. discuss problems with the multinomial assumption in the context of document classification and possible ways to alleviate those problems, including the use of tf–idf weights instead of raw term frequencies and document length normalization, to produce a naive Bayes classifier that is competitive with support vector machines.^{[6]}
Bernoulli naive Bayes
In the multivariate Bernoulli event model, features are independent booleans (binary variables) describing inputs. This model is also popular for document classification tasks,^{[4]} where binary term occurrence features are used rather than term frequencies. If is a boolean expressing the occurrence or absence of the i'th term from the vocabulary, then the likelihood of a document given a class C is given by^{[4]}
where is the probability of class C generating the term . This event model is especially popular for classifying short texts. It has the benefit of explicitly modelling the absence of terms. Note that a naive Bayes classifier with a Bernoulli event model is not the same as a multinomial NB classifier with frequency counts truncated to one.
Discussion
Despite the fact that the far-reaching independence assumptions are often inaccurate, the naive Bayes classifier has several properties that make it surprisingly useful in practice. In particular, the decoupling of the class conditional feature distributions means that each distribution can be independently estimated as a one-dimensional distribution. This helps alleviate problems stemming from the curse of dimensionality, such as the need for data sets that scale exponentially with the number of features. While naive Bayes often fails to produce a good estimate for the correct class probabilities, this may not be a requirement for many applications. For example, the naive Bayes classifier will make the correct MAP decision rule classification so long as the correct class is more probable than any other class. This is true regardless of whether the probability estimate is slightly, or even grossly inaccurate. In this manner, the overall classifier can be robust enough to ignore serious deficiencies in its underlying naive probability model. Other reasons for the observed success of the naive Bayes classifier are discussed in the literature cited below.
Examples
Sex classification
Problem: classify whether a given person is a male or a female based on the measured features. The features include height, weight, and foot size.
Training
Example training set below.
sex | height (feet) | weight (lbs) | foot size(inches) |
---|---|---|---|
male | 6 | 180 | 12 |
male | 5.92 (5'11") | 190 | 11 |
male | 5.58 (5'7") | 170 | 12 |
male | 5.92 (5'11") | 165 | 10 |
female | 5 | 100 | 6 |
female | 5.5 (5'6") | 150 | 8 |
female | 5.42 (5'5") | 130 | 7 |
female | 5.75 (5'9") | 150 | 9 |
The classifier created from the training set using a Gaussian distribution assumption would be (given variances are sample variances):
sex | mean (height) | variance (height) | mean (weight) | variance (weight) | mean (foot size) | variance (foot size) |
---|---|---|---|---|---|---|
male | 5.855 | 3.5033e-02 | 176.25 | 1.2292e+02 | 11.25 | 9.1667e-01 |
female | 5.4175 | 9.7225e-02 | 132.5 | 5.5833e+02 | 7.5 | 1.6667e+00 |
Let's say we have equiprobable classes so P(male)= P(female) = 0.5. This prior probability distribution might be based on our knowledge of frequencies in the larger population, or on frequency in the training set.
Testing
Below is a sample to be classified as a male or female.
sex | height (feet) | weight (lbs) | foot size(inches) |
---|---|---|---|
sample | 6 | 130 | 8 |
We wish to determine which posterior is greater, male or female. For the classification as male the posterior is given by
For the classification as female the posterior is given by
The evidence (also termed normalizing constant) may be calculated:
However, given the sample the evidence is a constant and thus scales both posteriors equally. It therefore does not affect classification and can be ignored. We now determine the probability distribution for the sex of the sample.
- ,
where and are the parameters of normal distribution which have been previously determined from the training set. Note that a value greater than 1 is OK here – it is a probability density rather than a probability, because height is a continuous variable.
Since posterior numerator is greater in the female case, we predict the sample is female.
Document classification
Here is a worked example of naive Bayesian classification to the document classification problem. Consider the problem of classifying documents by their content, for example into spam and non-spam e-mails. Imagine that documents are drawn from a number of classes of documents which can be modelled as sets of words where the (independent) probability that the i-th word of a given document occurs in a document from class C can be written as
(For this treatment, we simplify things further by assuming that words are randomly distributed in the document - that is, words are not dependent on the length of the document, position within the document with relation to other words, or other document-context.)
Then the probability that a given document D contains all of the words , given a class C, is
The question that we desire to answer is: "what is the probability that a given document D belongs to a given class C?" In other words, what is ?
Now by definition
and
Bayes' theorem manipulates these into a statement of probability in terms of likelihood.
Assume for the moment that there are only two mutually exclusive classes, S and ¬S (e.g. spam and not spam), such that every element (email) is in either one or the other;
and
Using the Bayesian result above, we can write:
Dividing one by the other gives:
Which can be re-factored as:
Thus, the probability ratio p(S | D) / p(¬S | D) can be expressed in terms of a series of likelihood ratios. The actual probability p(S | D) can be easily computed from log (p(S | D) / p(¬S | D)) based on the observation that p(S | D) + p(¬S | D) = 1.
Taking the logarithm of all these ratios, we have:
(This technique of "log-likelihood ratios" is a common technique in statistics. In the case of two mutually exclusive alternatives (such as this example), the conversion of a log-likelihood ratio to a probability takes the form of a sigmoid curve: see logit for details.)
Finally, the document can be classified as follows. It is spam if (i.e., ), otherwise it is not spam.
See also
- AODE
- Bayesian spam filtering
- Bayesian network
- Random naive Bayes
- Linear classifier
- Bayesian inference (esp. as Bayesian techniques relate to spam)
- Boosting (meta-algorithm)
- Fuzzy logic
- Logistic regression
- Class membership probabilities
- Neural networks
- Predictive analytics
- Perceptron
- Support vector machine
- Feature selection
References
This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (May 2009) |
- ^ Zhang, Harry. "The Optimality of Naive Bayes". FLAIRS2004 conference.
- ^ Caruana, R.; Niculescu-Mizil, A. (2006). "An empirical comparison of supervised learning algorithms". Proceedings of the 23rd international conference on Machine learning. CiteSeerX: 10.1.1.122.5901.
- ^ John, George H.; Langley, Pat (1995). "Estimating Continuous Distributions in Bayesian Classifiers". Proc. Eleventh Conf. on Uncertainty in Artificial Intelligence. Morgan Kaufmann. pp. 338–345.
- ^ ^{a} ^{b} ^{c} McCallum, Andrew; Nigam, Kamal (1998). "A comparison of event models for Naive Bayes text classification". AAAI-98 workshop on learning for text categorization 752.
- ^ Metsis, Vangelis; Androutsopoulos, Ion; Paliouras, Georgios (2006). "Spam filtering with Naive Bayes—which Naive Bayes?". Third conference on email and anti-spam (CEAS) 17.
- ^ ^{a} ^{b} Rennie, J.; Shih, L.; Teevan, J.; Karger, D. (2003). "Tackling the poor assumptions of Naive Bayes classifiers". ICML.
Further reading
- Domingos, Pedro; Pazzani, Michael (1997). "On the optimality of the simple Bayesian classifier under zero-one loss". Machine Learning 29: 103–137.
- Rish, Irina (2001). "An empirical study of the naive Bayes classifier". IJCAI 2001 Workshop on Empirical Methods in Artificial Intelligence.
- Hand, D. J.; Yu, K. (2001). "Idiot's Bayes — not so stupid after all?". International Statistical Review 69 (3): 385–399. ISSN 0306-7734.
- Webb, G. I.; Boughton, J.; Wang, Z. (2005). "Not So Naive Bayes: Aggregating One-Dependence Estimators". Machine Learning (Springer) 58 (1): 5–24.
- Mozina, M.; Demsar, J.; Kattan, M.; Zupan, B. (2004). "Nomograms for Visualization of Naive Bayesian Classifier". Proc. PKDD-2004. pp. 337–348.
- Maron, M. E. (1961). "Automatic Indexing: An Experimental Inquiry". JACM 8 (3): 404–417.
- Minsky, M. (1961). "Steps toward Artificial Intelligence". Proc. IRE 49 (1). pp. 8–30.
External links
- Book Chapter: Naive Bayes text classification, Introduction to Information Retrieval
- Naive Bayes for Text Classification with Unbalanced Classes
- Benchmark results of Naive Bayes implementations
- Hierarchical Naive Bayes Classifiers for uncertain data (an extension of the Naive Bayes classifier).
- Software
- Naive Bayes classifiers are available in many general-purpose machine learning and NLP packages, including Apache Mahout, Mallet, NLTK, Orange, scikit-learn and Weka.
- IMSL Numerical Libraries Collections of math and statistical algorithms available in C/C++, Fortran, Java and C#/.NET. Data mining routines in the IMSL Libraries include a Naive Bayes classifier.
- Winnow content recommendation Open source Naive Bayes text classifier works with very small training and unbalanced training sets. High performance, C, any Unix.
- An interactive Microsoft Excel spreadsheet Naive Bayes implementation using VBA (requires enabled macros) with viewable source code.
- jBNC - Bayesian Network Classifier Toolbox
- Statistical Pattern Recognition Toolbox for Matlab.
- ifile - the first freely available (Naive) Bayesian mail/spam filter
- NClassifier - NClassifier is a .NET library that supports text classification and text summarization. It is a port of Classifier4J.
- Classifier4J - Classifier4J is a Java library designed to do text classification. It comes with an implementation of a Bayesian classifier.